May 20, 2024  
2016-2017 College Catalog 
    
Catalog Navigation
  Catalog Home
  Academic Calendar
  General College Section
  Board of Supervisors and Trustees
  Admissions
  Financial Information
  Student Services
  Instructional Programs
  Articulation Agreements
  University Parallel Programs
  Career and Technical Education Programs
  Apprenticeship Programs
  Healthcare Programs
  Courses of Instruction
  Personnel
  Administration and Faculty
  College Catalog Archive
  My Portfolio
HELP
2016-2017 College Catalog [ARCHIVED CATALOG]

Courses of Instruction

Maybe you’ve known what you wanted to do for a living since age 10. Maybe you only recently decided. Or maybe you want to take some classes because, well, you just want to. Whatever your case, Mississippi Gulf Coast Community College can fit your interests with courses that lead you to a degree, a career, a more fulfilled life.

It’s been proven time and again that a college education means more money and more self-esteem. The instructors of our courses and programs know this, too, and that’s why they keep pace with current trends and technology. And it’s why they bring their knowledge and expertise to the classroom, the lab, the studio, the online course or wherever class may take you.

The three figures in parentheses after the description of each academic and technical course indicate the number of semester hour’s credit for the course, the number of lecture hours each week, and the number of laboratory or activity hours each week, respectively. Instructional hours are indicated for career and technical courses.
 

Drafting and Design Technology
  

  • DDT 1133 - Machine Drafting I

    Credit(s): 3

    Emphasizes methods, techniques, and procedures in presenting screws, bolts, rivets, springs, thread types, symbols for welding, materials, finish and heat treatment notation, working order preparation, routing, and other drafting room procedures. Ninety hours instruction. Prerequisite: DDT 1114 . Three semester hours (3,1,4)
  

  • DDT 1153 - Descriptive Geometry

    Credit(s): 3

    Theory and problems designed to develop the ability to visualize points, lines, and surfaces of space. Ninety hours instruction. Three semester hours. Prerequisite: DDT 1113   DDT 1114 . (3,1,4)
  

  • DDT 1163 - Engineering Graphics

    Credit(s): 3

    This course provides an introduction to fundamentals and principles of drafting to provide the Basic background needed for all other drafting courses. (3, 2 ,2)
  

  • DDT 1173 - Mechanical Design I

    Credit(s): 3

    Students will utilize techniques of modeling to create machine specific drawings. The course emphasizes methods, techniques, and procedures (in presenting screws, bolts, rivets, springs, thread types, symbols for welding, materials, finish and heat treatment notation, working order preparation, routing, and other industry procedures) used in mechanical design. Ninety hours of instruction. Prerequisite: DDT1163 and DDT1313 (3, 1 , 4)
  

  • DDT 1213 - Construction Materials

    Credit(s): 3

    A course designed to familiarize the student with the physical properties of the materials generally used in the erection of structure, with a brief description of their manufacture. Ninety hours instruction. Three semester hours. (3,2,2)
  

  • DDT 1213 - Construction Standards and Materials

    Credit(s): 3

    This course introduces the standards and materials used in the construction process. (3, 2, 2)
  

  • DDT 1313 - Computer Aided Design I

    Credit(s): 3

    This course is designed to develop basic operating system and drafting skills on CAD. (3,1,4)
  

  • DDT 1323 - Computer Aided Design II

    Credit(s): 3

    Subject areas include dimensioning, sectional views, and symbols. Prerequisite: DDT1313 (3, 1, 4)
  

  • DDT 1413 - Elementary Surveying

    Credit(s): 3

    Basic course dealing with principles of geometry, theory and use of instruments, mathematical calculations, and the control and reduction of errors. Ninety hours instruction. Three semester hours. (3,1,4)
  

  • DDT 1513 - Blueprint Reading

    Credit(s): 3

    This course is designed to provide the student with terms and definitions used in reading blueprints. (Enrollment in this course is limited to vocational certificate students in other disciplines). Ninety hours of instruction. Prerequisite: DDT 1113   DDT 1114 . Three semester hours. (3,2,2)
  

  • DDT 1613 - Architectural Design I

    Credit(s): 3

    Presentation and application of architectural drafting room standards. Also the study of architectural design of a residential structure. Prerequisites: DDT 1114   DDT 1113  , DDT 1313 , DDT 1323  or instructor approval. (3,1,4)
  

  • DDT 2153 - Civil Planning and Design

    Credit(s): 3

    This course deals with the development of civil planning and design processes. Prerequisite: DDT 1163  , DDT 1313  and DDT 1323  (3, 1, 4)
  

  • DDT 2213 - Structural Detailing I

    Credit(s): 3

    Structural section, terms, and conventional abbreviations and symbols used by structural fabricators and erectors are studied. Knowledge is gained in the use of the A.I.S.C. Handbook. Problems are studied that involve structural designing and drawing of beams, columns, connections, trusses, and bracing (steel, concrete, and wood).  Students will utilize 2D or 3D software. Prerequisite: DDT 1163  , DDT 1313  and DDT 1323  (3, 1, 4)
  

  • DDT 2243 - Cost Estimating

    Credit(s): 3

    Preparation of material and labor quantity surveys from actual working drawings and specifications. Ninety hours instruction. Three semester hours. (3,2,2)
  

  • DDT 2253 - Statics and Strength of Materials

    Credit(s): 3

    Study of forces acting on bodies; movement of forces; stress of materials; basic machine design; beams, columns, and connections. Prerequisite: MAT 1313 . (3,2,2)
  

  • DDT 2343 - Advanced CAD

    Credit(s): 3

    This course is designed as a continuation of DDT 1313 . Emphasis is placed on attributes, slide shows, the user coordinate system. 3-D faces, and solid modeling. Ninety hours instruction. Prerequisite: DDT 1313 . Three semester hours. (3,1,4)
  

  • DDT 2373 - 3D Modeling

    Credit(s): 3

    This course will emphasize the user coordinate system and 3-D modeling. Prerequisite:DDT 1163  , DDT 1313  and DDT 1323  . (3, 1, 4)
  

  • DDT 2473 - Electrical Engineering

    Credit(s): 3

    This course will provide instruction in the basic knowledge needed to create electrical design 3-D models to support electrical products using individual components. (3,2,2)
  

  • DDT 2483 - Marine Engineering

    Credit(s): 3

    This course will provide Instruction in the basic knowledge needed to create marine design 3-D models to support marine products using individual components. (3,2, 2)
     
  

  • DDT 2523 - Pipe Drafting

    Credit(s): 3

    Instruction in the basic knowledge needed to create process piping and drawings using individual piping components. Students will utilize 2D or 3D. Prerequisite: DDT 1163  , DDT 1313  and DDT 1323  (3, 1, 4) was (3,2,2)
  

  • DDT 2543 - Steel Ship Building and Design

    Credit(s): 3

    This course is designed to provide the student with an understanding of the ship as a whole and the process of ship design and planning. Prerequisite: DDT 1114   DDT 1113  . (3,2,2)
  

  • DDT 2563 - Introduction to Shipbuilding and Blueprint Reading

    Credit(s): 3

    Introduction to basic shipbuilding and the process of ship design and planning. This course will also provide students with terms, definitions and reading basic blueprints. Utilizing skills in basic drawing and dimensioning of objects will be covered. (3,2,2)
  

  • DDT 2623 - Architectural Design II

    Credit(s): 3

    This course emphasizes standard procedures and working drawings. Details involving architectural, mechanical, electrical, and structural drawings are covered, along with presentation of drawings and computer aided design assignments. Ninety hours instruction. Three semester hours. Prerequisite: DDT 1613 . (3,1,4)
  

  • DDT 2643 - Naval Architecture and Ship Structures

    Credit(s): 3

    This course provides an in-depth insight to the overall shipbuilding process. It begins with a brief history of shipbuilding and proceeds into the shipbuilding processes, the types of steel use in ship manufacturing, welding and testing processes used in ship construction and integration of various components into a functional vessel. (3,2, 2)
  

  • DDT 2664 - Marine Systems Integration

    Credit(s): 4

    The contents of this course are developed for a designer apprentice position. This course places emphasis on the integration of hull and machinery systems into a complete vessel package. The design and analysis of general guidance, hull structure, propulsion, electrical, command and surveillance, auxiliary systems, outfitting and furnishings, and armament are investigated. Included is the study of equipment installation, plating and bulkheads, propulsion systems, power generation, combat systems, HVAC and weapons management. (4,4,0)
  

  • DDT 2813 - Inventor 3D Modeling and Animation

    Credit(s): 3

    This course will provide instruction on the 3D applications of Inventor. Emphasizing the development of 3D parametric Models and the ability to generate 2D drawings, details and renderings from the model.  This course will also provide the utilization of assembly drawings and animation of working parts. (3,1,4) 
  

  • DDT 2823 - Revit Architecture 3D Modeling

    Credit(s): 3

    This course provides instruction on the 3D applications of Revit Architecture. Emphasize the development of 3D parametric building models e ability to generate 2D drawings, details and renderings from the 3D model. This course will also provide animation walk thrus of the 3D building. (3,1,4)
  

  • DDT 2843 - Marine Design Capstone

    Credit(s): 3

    This course will serve as a capstone to the formal educational experience. Students will utilize the subject matter from all previous coursework. This course will provide for an extensive demonstration encompassing the knowledge gained. The instructor will work closely with the student to insure that the selection of a project will enhance the student’s learning experience. Prerequisite consent of instructor. 
    (3,1,4 )
     
  

  • DDT 2913 - Special Project

    Credit(s): 3

    A course designed to provide the student with practical application of skills and knowledge gained in other drafting courses. The instructor works closely with the student to insure that the selection of a project will enhance the student’s learning experience. Prerequisite: Consent of instructor. (3,0,6)

Economics
  

  • ECO 2113 - Principles of Macroeconomics

    Credit(s): 3

    The study of a nation’s economy to include the following topics: supply and demand, production possibilities, monetary and fiscal policies, factors of production, GDP/business cycles and economic growth, circular flow of market economies. (3,3,0)
  

  • ECO 2123 - Principles of Microeconomics

    Credit(s): 3

    The study of firms, industries and consumers to include the following topics: supply and demand, elasticity of demand and supply, consumer choice theory, production and cost theory and market structures. (3,3,0)

Electronics
  

  • EET 1114 - DC Circuits

    Credit(s): 4

    This course is designed for students to know the principles and theories associated with DC circuits. This course includes the study of electrical circuits, laws and formulae, and the use of test equipment to analyze DC circuits. Corequisite: EET 1102. (4,2,4)
  

  • EET 1123 - AC Circuits

    Credit(s): 3

    This course is designed to provide students with the principles and theories associated with AC circuits. This course includes the study of electrical circuits, lays and formulae, and the use of test equipment to analyze AC circuits. Prerequisites: EET 1114 . (3,2,2)
  

  • EET 1214 - Digital Electronics

    Credit(s): 4

    A course designed to introduce the student to number systems, logic circuits, counters, registers, memory devices, combination logic circuits, Boolean algebra, and a basic computer system. (4,3,2)
  

  • EET 1324 - Microprocessors

    Credit(s): 4

    This course is designed to provide students with skills and knowledge of microprocessor architecture, machine and assembly language, timing, interfacing, and other hardware applications associated with microprocessor systems. Prerequisite: EET 1214 . (4,2,4)
  

  • EET 1334 - Solid State Devices and Circuits

    Credit(s): 4

    This course is designed to introduce the student to active devices, which include PN junction diodes, bipolar transistors, bipolar transistor circuts, and unipolar devices with emphasis on low frequency application and troubleshooting. Pre/corequisites: EET 1123 , EET 1114 . (4,2,4)
  

  • EET 1613 - Computer Fundamentals for Electronics/Electricity

    Credit(s): 3

    This course introduces the student to basic computer science as used in electricity/electronics areas. Computer nomenclature, logic, numbering systems, coding, operating systems commands, editing, and batch files are covered. This course may be substituted for Introduction to Computers CPT 1113. (3,2,2)
  

  • EET 1713 - Drafting for Electronic/Electrical Technology

    Credit(s): 3

    This course is designed to provide instruction on the preparation and interpretation of schematics. (3,1,4)
  

  • EET 2334 - Linear Integrated Circuits

    Credit(s): 4

    This course is designed to provide the student with skills and knowledge associated with advanced semiconductor devices and linear integrated circuits. Emphasis is placed on linear integrated circuits used with operational amplifiers, active filters, voltage regulators, timers and phase-locked loops. Prerequisite: EET 1334 . (4,3,2)
  

  • EET 2354 - Solid State Motor Control

    Credit(s): 4

    This course covers the principles and operations of solid state motor control as well as the design, installation, and maintenance of different solid state devices for motor control. (4,2,4)
  

  • EET 2364 - Programmable Logic Con/HMI

    Credit(s): 4

    This course covers the use of programmable logic l controllers (PLCs) in modern industrial settings as well as the operating principles of PLCs and practice in the programming, installation, and maintenance of PLCs. (4,2,4)
  

  • EET 2414 - Electronic Communications

    Credit(s): 4

    This course is designed to provide the student with concepts and skills related to analog and digital communications. Topics covered include amplitude and frequency modulation, transmission, and reception, data transmission formats and codes, the RS-232 interface, and modulation-demodulation of digital communications. Prerequisite: EET 1334 . (4,2,4)
  

  • EET 2423 - Fundamentals of Fiber Optics

    Credit(s): 3

    This course is designed to provide skills and knowledge concerning the use of fiber optic cable in modern industry applications. Corequisite: EET 2334 . (3,2,2)
  

  • EET 2514 - Interfacing Techniques

    Credit(s): 4

    This course is a study of data acquisition devices and systems including their interface to microprocessors and other control systems. Prerequisite: EET 1324 . (4,2,4)
  

  • EET 2913 - Special Project

    Credit(s): 3

    This course is designed to provide the student with practical application of skills and knowledge gained in other electronics or electronics-related technical courses. The instructor works closely with the student to insure that the selection of a project will enhance the student’s learning experience. Prerequisite: Consent of instructor. (3,0,6)

Engineering
  

  • EGR 2413 - Engineering Mechanics I

    Credit(s): 3

    Vector algebra, Newton’s laws, equilibrium conditions for particles and rigid bodies; analysis of structures. Prerequisite: Credit or enrollment in MAT 1623 , Calculus II-A. (3,3,0)
  

  • EGR 2433 - Engineering Mechanics II

    Credit(s): 3

    A lecture course that covers kinematics of particles and rigid bodies, kinetics of particles and rigid bodies using force-mass-acceleration, energy, and momentum methods.

    Prerequisites: EGR 2413  and credit or enrollment in EGR 2413  , Calculus III. (3,3,0)

Electrical Technology
  

  • ELT 1113 - Residential Wiring

    Credit(s): 3

    This course includes the advanced skills related to the wiring of single and multifamily buildings. Includes instruction and practice in service-entrance installation, National Electrical Code ® requirements, and specialized circuits. Prerequisite:  ELT 1123  (3,2,2)
  

  • ELT 1123 - Commercial Wiring

    Credit(s): 3

    This course provides instruction and practice in the installation of commercial electrical services including the types of conduit and other raceways, National Electrical Code ® requirements, and three-phase distribution networks. Prerequisites:  ELT 1233  . (3,2,2)
  

  • ELT 1133 - Introduction to Electric Code

    Credit(s): 3

    The course is designed to place emphasis on developing the student’s ability to locate, interpret and properly apply information in the National Electrical Code in real-world applications. (3, 2, 2)
  

  • ELT 1144 - AC and DC Circuits

    Credit(s): 4

    Principles and theories associated with AC and DC circuits used in the electrical trades. Includes the study of electrical circuits, laws, and formulas, and the use of test equipment to analyze AC and DC circuits. (4, 2, 4).
  

  • ELT 1183 - Industrial Wiring

    Credit(s): 3

    This course includes instruction and practice in the installation of industrial electrical services including the types of conduit and other raceways, National Electrical Code ® requirements, and three-phase distribution networks. Prerequisite: ELT 1113  (3,2,2)

     
  

  • ELT 1213 - Electrical Power

    Credit(s): 3

    This course provides information on electrical motors and their installation. Instruction and practice in using the different types of electrical motors, transformers, and alternators. Prerequisite: ELT 1144  . (3,2,2)
  

  • ELT 1223 - Motor Maintenance and Troubleshooting

    Credit(s): 3

    This course includes the principles and practice of electrical motor repair. Topics on the disassembly/assembly and preventive maintenance of common electrical motors are discussed. (3,2,2)
  

  • ELT 1233 - Fundamentals of Electricity

    Credit(s): 3

    This course is designed to introduce students to the fundamental skills associated with all electrical courses. Safety, basic tools, special tools, equipment, and an introduction to simple AC and DC circuits will be included. (3,2,2)
  

  • ELT 1253 - Branch Circuit and Service Entrance Calculations

    Credit(s): 3

    The course is designed to teach students the calculations of circuit sizes for all branch circuits and service entrances in all electrical installation. Proper use of the National Electrical Code ® will be required. Prerequsite: ELT 1213  . (3,2,2)
  

  • ELT 1262 - Blueprint Reading/Planning in Residential Installation

    Credit(s): 2

    This course provides knowledge of architectural symbols and electric symbols needed to read blueprints. All elevations and various plans associated with electrical wiring will be studied. Blank blueprints will be provided and a list of all appliances and their amperage will be supplied. The blanks will be filled with receptacles, switches, and lighting outlets as required by NEC. Circuit layouts will be plotted on the blueprint. (2,1,2)
  

  • ELT 1263 - Electrical Drawings and Schematics

    Credit(s): 3

    This course introduces architectural, industrial, mechanical, and electrical symbols needed to read blueprints, schematic diagrams. Prints and drawings associated with electrical wiring will be studied. Prerequisite: ELT 1253  . (3,2,2)
  

  • ELT 1273 - Switching Circuits for Residential, Commercial, and Industrial Application

    Credit(s): 3

    This course provides an introduction to various methods by which switches and control devices are installed. It includes installation and operation of residential/commercial automation systems. (3,2,2)
  

  • ELT 1283 - Estimating the Cost of a Residential Installation

    Credit(s): 3

    This course gives students the knowledge and ability to estimate the cost of an electrical installation using specifications for various structures. (3,2,2)
  

  • ELT 1413 - Motor Control Systems

    Credit(s): 3

    This is a course in the installation of different motor control circuits and devices. Emphasis is placed on developing the student’s ability to diagram, wire, and troubleshoot the different circuits and mechanical control devices. Prerequisite:  ELT 1263  . (3,2,2)
  

  • ELT 2114 - Equipment Maintenance and Troubleshooting

    Credit(s): 4

    This course includes maintenance and troubleshooting techniques, use of technical manuals and test equipment, and inspection/evaluation/repair of equipment. Prerequisite: ELT 1413  . (4,1,6)
  

  • ELT 2423 - Solid State Motor Control

    Credit(s): 3

    This course deals with the principles and operation of solid state motor control. This course includes instruction and practice in design, installation, and maintenance of different solid state devices for motor control. Prerequisite: ELT 1413 . (3,1,6)
  

  • ELT 2424 - Solid State Motor Control

    Credit(s): 4

    This course provides knowledge of the principles and operation of solid state motor control, and variable frequency drives. The design, installation, and maintenance of different solid state devices for motor control will be introduced. Prerequisite: ELT 2114. (4,2,4)
  

  • ELT 2613 - Programmable Logic Controllers

    Credit(s): 3

    This course provides instruction in the use of programmable logic controllers (PLCs) in modern industrial settings. The operating principles, installation and basic programming of PLCs will be covered. Prerequisite: ELT 2424  . (3,1,4)
  

  • ELT 2623 - Advanced Programmable Logic Controllers

    Credit(s): 3

    This is an advanced PLC course which provides instruction in the various operations, installations, and maintenance of electric motor controls. This course will provide information in such areas as sequencer, program control, block transfer used in analog input and output programming, and logical and conversion instructions. Prerequisites: ELT 2613 - Programmable Logic Controllers  and ELT 1413 - Motor Control Systems . Ninety clock hours. Three semester hours.
  

  • ELT 2911 - Special Projects I

    Credit(s): 1-3

     This course provides practical application of skills and knowledge gained in other electrical or electrical-related technical courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student’s learning experience. (1–3,1-3,2–6)
  

  • ELT 2913 - Special Project

    Credit(s): 3

    This course is designed to provide the student with practical application of skills and knowledge gained in other electronics or electronics-related technical courses. The instructor works closely with the student to insure that the selection of a project will enhance the student’s learning experience. Prerequisite: Consent of instructor. Ninety clock hours. Three semester hours.

Emergency Medical and Paramedic

*The Prerequisite for all advanced-level EMS courses identified by an * is the successful completion of EMT 1118 - EMT Basic Course . Further, all first semester EMS-prefaced courses are prerequisite for second semester courses, and all second semester courses are prerequisite for third semester courses.
  

  • EMS 1122 - Introduction to Emergency Medical Services (EMS) Systems

    Credit(s): 2

    This course introduces the student to the Emergency Medical Services (EMS) systems, roles, and responsibilities of the paramedic, well-being of the paramedic, illness and injury prevention, medical/legal issues, ethical issues, therapeutic communications, and life span development. (2,1,2)
  

  • EMS 1314 - Airway: Management, Respiratory and Oxygen

    Credit(s): 4

    This course will provide the student with the essential knowledge to attain an airway and manage the respiratory system using advanced techniques. Corequisite: EMS 1122  and BIO 2524 . (4,1,6)
  

  • EMS 1414 - Patient Assessment

    Credit(s): 4

    This course will teach comprehensive history taking and physical exam techniques. Corequisite: EMS 1122  and BIO 2524 . (4,1,6)
  

  • EMS 1422 - EMS Special Patient Populations

    Credit(s): 2

    This course will provide a comprehensive overview of providing care for the patient with special needs. Prerequsite: All first semester courses. (2,1,2)
  

  • EMS 1513 - EMS Practicum I

    Credit(s): 3

    This course will provide clinical training on the skills and knowledge obtained in the classroom. This will be a supervised activity carried out in the clinical and field setting at approved sites. Corequisites: EMS 1122 , EMS 1314 , and EMS 1414 . (3,0,9)
  

  • EMS 1525 - EMS Practicum II

    Credit(s): 5

    This course will provide clinical and field training on the skills and knowledge obtained in classroom. This will be a supervised activity carried out in the clinical and field setting at approved site. Prereqqisite: EMS 1513 . (5,9,6)
  

  • EMS 1614 - Pharmacology

    Credit(s): 4

    This course will teach comprehensive pharmodynamics and pharmacokinetics. Corequisites: EMS 1122  and BIO 2524 . (4,2,4)
  

  • EMS 1825 - Cardiology

    Credit(s): 5

    This class will teach a comprehensive approach to the care of patients with acute and complex cardiovascular compromise, Prerequisites: All first semester courses. (5,2,6)
  

  • EMS 2414 - Maternal/Child Emergencies

    Credit(s): 4

    This course will provide a detailed understanding of the anatomic structures, physiology, and pathophysiology encountered when providing care in gynecological and obstetrical emergencies as well as pediatric emergencies. Prerequisites: All first semester courses. (4,3,2)
  

  • EMS 2565 - EMS Practicum III

    Credit(s): 5

    This course will provide advanced clinical and field experiences in the skills and knowledge obtained in the classroom with an emphasis on leadership skills. These will be supervised activities carried out in the clinical and out-of-hospital field setting at approved sites with an approved preceptor. Prerequisite: EMS 1553. (5,0,15)
  

  • EMS 2714 - Trauma

    Credit(s): 4

    This course will provide advanced instruction in the integration of pathophysiological principles and assessment findings to formulate a field impression and implement a treatment plan for a suspected trauma patient. Prerequisite: All first semester courses. (4,2,4)
  

  • EMS 2855 - Medical

    Credit(s): 5

    This course will provide a detailed understanding of the anatomic structures, physiology, and pathophysiology encountered when providing care in medical emergencies involving pulmonary, allergy and anaphylaxis, gastroenterology, renal urology, and hematology. Prerequisites: All first semester courses. (5,2,6)
  

  • EMS 2912 - EMS Operations

    Credit(s): 2

    This course teaches the leadership skills necessary to manage complex situations including patient care, management of the hazardous and crime scene, supervision, mentoring, and leading other personnel. Prerequisites: All first semester courses. (2,1,2)
  

  • EMT 1118 - EMT Basic Course

    Credit(s): 8

    This course is an instructional program that prepares individuals to function in the prehospital environment. The EMT-Basic program provides instruction in basic life support care of sick and injured persons, including airway assessment, shock management, communications, documentation, general pharmacology for the basic provider, hemorrhage control, ambulance operations, and splinting of adult, pediatric and infant patients, as well as special care of patients exposed to heat, cold, radiation, hazardous materials, poisons or contagious disease. This course is prerequisite for entry to the EMT-Paramedic Training Program. (8,5,4,3)

English
  

  • ENG 0111 - English and Reading Lab 1

    Credit(s): 1

    Opportunity to provide supplemental instruction/practice/support in a structures lab environment. (1,0,2)
  

  • ENG 0114 - Beginning English and Reading

    Credit(s): 4

    ENG 0114 is an integrated course designed to develop basic writing skills and reading strategies. (4,4,0)
  

  • ENG 0121 - English and Reading Lab 2

    Credit(s): 1

    Opportunity to provide supplemental instruction/practice/support in a structures lab environment. (1,0,2)
  

  • ENG 0124 - Intermediate English and Reading

    Credit(s): 4

    ENG 0124 is and integrated course designed to advance students to college level writing skills and reading strategies. (4,4,0)
  

  • ENG 0131 - English and Reading Lab 3

    Credit(s): 1

    Opportunity to provide supplemental instruction/practice/support in a structures lab environment. (1,0,2)
  

  • ENG 1113 - English Composition I

    Credit(s): 3

    English 1113 prepares the student to think critically and compose texts for academic and professional rhetorical situations. Prerequisite: ACT English 17 or higher or Equivalent ACCUPLACER score in writing or successful completion of   . (3,3,0)
  

  • ENG 1114 - English Comp I

    Credit(s): 4

    English 1114 prepares the student to think critically and compose texts for academic and professional rhetorical situations. (4, 3, 2)
  

  • ENG 1123 - English Composition II

    Credit(s): 3

    ENG 1123 is a continuation of ENG 1113 with emphasis on research, argumentation, and composition. Readings, essays, and a research paper are required. ENG 1113  is a prerequisite to ENG 1123. (3,3,0)
  

  • ENG 1123H - Honors English Composition II

    Credit(s): 3

    Course builds upon the skills acquired in first semester composition. Special attention is given to critical reading of selections from various literary genres, written analysis based upon the selections, using the library, and documented research writing. Enrollment by invitation. Prerequitise: ENG 1113H , (3,3,0)
  

  • ENG 2133 - Creative Writing I

    Credit(s): 3

    ENG 2133 involves writing poetry, short fiction, creative nonfiction, and drama. Prerequisite:  ENG 1123H  or  ENG 1123  . (3,3,0)
  

  • ENG 2143 - Creative Writing II

    Credit(s): 3

    ENG 2143 is a  continuation of reading and writing poetry, short fiction, creative nonfiction, and/or drama. (3,3,0)
  

  • ENG 2153 - Traditional Grammar

    Credit(s): 3

    ENG 2153 focuses on the basic elements of English grammar and mechanics. Prerequisite:   ENG 1123   or   . (3,3,0)
  

  • ENG 2223 - American Literature I

    Credit(s): 3

    Surveys representative prose and poetry of the United States from its beginnings to the Civil War. Prerequisite:  ENG 1123  . (3,3,0)
  

  • ENG 2233 - American Literature II

    Credit(s): 3

    Representative prose and poetry of the United States from Walt Whitman to the present. Prerequisite: ENG 1123H  or  ENG 1123  . (3,3,0)
  

  • ENG 2323 - British Literature I

    Credit(s): 3

    ENG 2323 surveys British Literature from the Anglo-Saxon Period through the Restoration and Eighteenth Century. Prerequisite:  ENG 1123  or   . (3,3,0)
  

  • ENG 2333 - British Literature II

    Credit(s): 3

    ENG 2333 surveys British literature from the Romantic Period to present. Prerequisite: ENG 1123H  or  ENG 1123  . (3,3,0)
  

  • ENG 2333H - Honors British Literature II

    Credit(s): 3

    ENG 2333  surveys British Literature from the Romantic Period through the Twentieth Century. Prerequisite: ENG 1123H . (3,3,0)
  

  • ENG 2423 - World Literature I

    Credit(s): 3

    ENG 2423 surveys texts representative of global and historical diversity from the ancient world through the early modern world. Prerequisite:   or  ENG 1123  . (3,3,0)
 

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11