2022-2023 College Catalog [ARCHIVED CATALOG]
Courses of Instruction
|
|
|
The following courses are offered at MGCCC. Courses are identified by name and number. Those numbered from 1001 to 1999 are considered freshman level courses, and those from 2001 to 2999 are sophomore level courses.
The three numbers in parentheses after the description of each academic and technical course indicate the number of semester hour credits for the course, the number of lecture hours each week, and the number of laboratory or activity hours each week, respectively. Instructional hours are indicated for career and technical courses.
|
| |
Cosmetology (COV) |
| |
-
COV 1732 - Salon Business II
Credit(s): 2
This course will cover operating a successful salon and seeking employment. Included are classroom theory and lab practice as governed by Mississippi cosmetology laws, rules, and regulations involved in cosmetology practices and safety precautions associated with each. Prerequisite: COV 1722 . (2,1,3)
|
| |
-
COV 2816 - Cosmetology Teacher Training I
Credit(s): 6
Instruction will be given in developing appropriate communication skills, effective use of visual aids, identification of various teaching styles, and practical application of cosmetology instruction. (6,3,9)
|
| |
-
COV 2826 - Cosmetology Teacher Training II
Credit(s): 6
Instruction will be given in development of instructional methods, development of visual aids, development of effective evaluation, and practical application of cosmetology instruction. (6,3,9)
|
| |
-
COV 2836 - Cosmetology Teacher Training III
Credit(s): 6
Instruction will be given in development of appropriate lesson plans and practical application of cosmetology instruction. (6,3,9)
|
| |
-
COV 2846 - Cosmetology Teacher Training IV
Credit(s): 6
Instruction will be given in classroom management techniques; cosmetology laws, rules, and regulations; and practical application of cosmetology instruction. (6,2,12)
|
Criminal Justice (CRJ) |
| |
-
CRJ 1313 - Introduction to Criminal Justice
Credit(s): 3
History, development, and philosophy of law enforcement in a democratic society, introduction to agencies involved in the administration of criminal justice; career orientation. (3,3,0)
|
| |
-
CRJ 1323 - Police Administration and Organization
Credit(s): 3
Principles of organization and administration in law enforcement as applied to law enforcement agencies; introduction to concepts of organizational behavior. (3,3,0)
|
| |
-
CRJ 1353 - Internship for Criminal Justice
Credit(s): 3
Practicum in an approved criminal justice agency under supervision of the agency concerned and college instructor. Written evaluation required of agency. Prerequisites for the 3 hour internship are: CRJ 1313 , CRJ 1323 . Must be a minimum of 18 years of age. (3,0,9) Prerequisites for the 12 hour internship are: Completion of all lecture courses. Must be a minimum of 21 years of age. (12,0,40)
|
| |
-
CRJ 1363 - Introduction to Corrections
Credit(s): 3
An overview of the correctional field; its origins, historical and philosophical background, development, current status, relationship with other facets of the criminal justice system. (3,3,0)
|
| |
-
CRJ 1373 - Introduction to Homeland Security
Credit(s): 3
The issues pertaining to the role and mission of the Department of Homeland Security and related agencies, both domestic and international. (3,3,0)
|
| |
-
CRJ 1383 - Criminology
Credit(s): 3
The study of criminal behavior to include theories, statistics, and trends of criminal behavior. (3,3,0)
|
| |
-
CRJ 2213 - Traffic Law
Credit(s): 3
An examination of the role of law enforcement in coping with traffic problems. Emphasis is placed on the history, development, and enforcement of statutes pertaining to motor vehicles. (3,3,0)
|
| |
-
CRJ 2313 - Police Operation and Ethics
Credit(s): 3
A study of the operation of law enforcement agencies. Particular emphasis is placed on the functions of the patrol division. (3,3,0)
|
| |
-
CRJ 2323 - Criminal Law
Credit(s): 3
Basic elements of substantive criminal law including defenses to criminal liability. (3,3,0)
|
| |
-
CRJ 2333 - Criminal Investigation
Credit(s): 3
Principles of investigation; proper collection, documentation, and preservation of evidence. (3,3,0)
|
| |
-
CRJ 2393 - Survey of Criminalistics
Credit(s): 3
The study and application of scientific evidence collection through various projects. (3,3,0)
|
| |
-
CRJ 2413 - Administration of Criminal Procedure
Credit(s): 3
A study of the legal concepts of criminal procedure. (3,3,0)
|
| |
-
CRJ 2513 - Juvenile Justice
Credit(s): 3
Organization, functions, and jurisdiction of juvenile agencies. Processing, detention, and disposition of cases. Statutes and court procedures applied to juveniles. (3,3,0)
|
Comm/Residential Construction (CRM) |
| |
-
CRM 1114 - Fundamentals of Maintenance Services
Credit(s): 4
Emphasis on basic concepts and practices in the maintenance programs for commercial and residential facilities including scheduling, work order systems, workforce management, inventory control, safety, and right-to-know programs. (4,2,2)
|
| |
-
CRM 1123 - Maintenance Regulations
Credit(s): 3
Basic information on the various federal, state, and local regulations agencies that govern maintenance operations and practices, including Occupational and Safety Health Act (OSHA), Environmental Protection Agency (EPA), and American with Disabilities Act (ADA). (3,2,2)
|
| |
-
CRM 1134 - Mathematics and Blueprint Interpretation
Credit(s): 4
Basic instruction in mathematics and the methods of interpreting information and the relationship of details and sections to an overall blueprint utilizing scale drawings, symbols, abbreviations, floor plans, elevations, and specifications tables. (4.3,2)
|
| |
-
CRM 1214 - Carpentry
Credit(s): 4
Basic course in carpentry skills required to perform building maintenance activities. Covers the installation methods and materials available to make repairs to building structures using accepted trade practices. (4,1,6)
|
| |
-
CRM 1223 - Surface Finishes
Credit(s): 3
Various techniques and processes of surface cleaning, preparation, and repair. (3,0,3)
|
| |
-
CRM 1314 - Masonry
Credit(s): 4
Techniques of brick, block, and ceramic tile laying and repairing processes to include safety practices. (4,1,4)
|
| |
-
CRM 1414 - Plumbing
Credit(s): 4
Basic design, function, maintenance, repair, and replacement of all types of light commercial and residential plumbing fixtures. (4,1,6)
|
| |
-
CRM 1432 - Landscape Irrigation
Credit(s): 2
Basic use of irrigation in residential and light commercial applications. Sprinkler designs and plans, practices, equipment, and maintenance for single-family dwellings, light commercial buildings, and apartment/townhouse complexes. (2,1,2)
|
| |
-
CRM 1514 - Electrical
Credit(s): 4
Basic electrical diagnosis and repair techniques including basic circuit theory, safety and grounding essentials, wiring systems, circuitry, and electrical troubleshooting. (4,2,3)
|
| |
-
CRM 1614 - Heating, Ventilating, and Air Conditioning
Credit(s): 4
Basic principles, operation, maintenance, and repair of heating, ventilation, and air conditioning in residential and light commercial buildings. (4,2,3)
|
| |
-
CRM 1714 - Special Problems in Welding
Credit(s): 4
Basic course in the development of welding skills in the safe use of the oxyfuel and arc welding techniques.
|
| |
-
CRM 2915 - Special Projects in CRM
Credit(s): 5
Practical application of skills and knowledge gained in other building maintenance courses. The instructor works closely with the student to insure that the selection of a project will enhance the student’s learning experience. (5,0,10)
|
Computer Science (CSC) |
| |
-
CSC 1123 - Computer Applications I
Credit(s): 3
This course is designed to teach computer applications to include word processing, electronic spreadsheets, database management, presentation design, and electronic communications. (This will satisfy most university requirements for a “computer science” course. Check with your specific university program for their computer literacy requirement.) (3,3,0)
|
| |
-
CSC 1213 - Visual BASIC Computer Programming I
Credit(s): 3
This course is designed to introduce the writing of event-driven programs using the Visual Basic computer programming language with emphasis on problem solving, documentation, program statements, algorithms, and common routines. Course has lecture with integrated lab components. Prerequisite: a) minimum ACT score of 19 on the math component, b) credit for MAT 1313 or MAT 1314 , or c) permission of the instructor. (3,3,0)
|
| |
-
CSC 1614 - Computer Programming I
Credit(s): 4
Introduction to problem-solving methods and algorithm development; designing, debugging, branching, looping, scope rules, functions, input/output manipulation (to include text files), simple arrays, and a variety of applications in an object-oriented programming language. Course has lecture with integrated lab components. (4,3,2)
|
| |
-
CSC 2134 - Programming I with C++
Credit(s): 4
An introduction to problem solving methods, algorithm development, designing, debugging, and documentation in C++ language with a variety of applications including 1/0 statements, operators,
conditional, looping, methods/functions, and array processing. (Course has a required lab component.) Prerequisite: MAT 1313 or MAT 1314 and CSC 1213 , previous programming experience or permission of instructor. (4,3,2)
|
| |
-
CSC 2144 - Programming II with C++
Credit(s): 4
This course is designed to be a continuation of program and algorithm development and analysis, search/sort methods, dynamic memory management, abstract data types and object-oriented design, designing and debugging larger programs. (Course has a required lab component.) Prerequisite: CSC 2134 - Programming I with C++ . (4,3,2)
|
| |
-
CSC 2844 - Data Structures
Credit(s): 4
This course includes advanced data abstraction and corresponding algorithms, memory management, searching and sorting techniques, hash tables, and algorithm analysis. Prerequisites: CSC 2144 . (4,3,2)
|
IT Specialist Technology (CST) |
| |
-
CST 1123 - Basic IT Hardware
Credit(s): 3
A survey of computer hardware components. Topics include hardware compatibility, system architecture, input devices, video displays and adapters, disk drives, and other related peripherals. Prerequisite CST 2113 . (3,2,2)
|
| |
-
CST 1213 - Networking I
Credit(s): 3
Concepts of telephony, local area networks, wide area networks, data transmission, and topology methods. (3,2,2)
|
| |
-
CST 1333 - Operating Systems
Credit(s): 3
Study of operating systems. Emphasis will be placed on support personnel interaction with operating systems and related software applications. (3,2,2)
|
| |
-
CST 1613 - Security Fundamentals
Credit(s): 3
Fundamentals of IT security. Topics include identifying risks and participating in risk mitigation activities; providing infrastructure, application, operational, and information security; applying security controls to maintain confidentiality, integrity, and availability; identifying appropriate technologies and products; troubleshooting security events and incidents; and operating with an awareness of applicable policies, laws, and regulations. (3,2,2)
|
| |
-
CST 1713 - Server Administration I
Credit(s): 3
Fundamentals of server support. Topics include support of server hardware, installation, and configuration of server operating systems, and asset management. (3,2,2)
|
| |
-
CST 1813 - Server Administration II
Credit(s): 3
Fundamentals of server support. Topics include support of server hardware, installation and configuration server operating systems, and asset management. (3,2,2)
|
| |
-
CST 1913 - Mobile Device Support I
Credit(s): 3
Fundamentals of mobile device support. Topics include an overview of mobile computing history, modern mobile operating systems and related software, types of devices and accessories, common networking protocols, standards-based wireless networking, cellular technology, and wireless network planning design concepts. (3,2,2)
|
| |
-
CST 1923 - Mobile Device Support II
Credit(s): 3
Continuation of Mobile Device Support I. Topics include mobile device management concepts, application deployment, security, data protection best practices and utilizing the troubleshooting methodology to proper diagnose various mobile device technology concerns. (3,2,2)
|
| |
-
CST 2113 - IT Servicing Lab I
Credit(s): 3
Fundamentals of IT servicing. Includes configuration, test equipment and software usage, basic disassembly and assembly methods, preliminary tests and diagnostics, and schematic interpretation. Additional emphasis will be placed on troubleshooting methodology implementation on various hardware and software systems. Prerequisites or Corequisites: CST 1123 CST 1333 . (3,2,2)
|
| |
-
CST 2123 - IT Servicing Lab II
Credit(s): 3
Continuation of IT Servicing Lab I with an increased emphasis on system analysis and diagnosis of PC component and software failures. Additional emphasis will be placed on the diagnosis of hardware and software issues pertaining to mobile devices such as smart phones, tablets, and portable computers, as well as printer and network technology concerns. Prerequisite: CST 2113 . (3,2,2)
|
| |
-
CST 2223 - Networking II
Credit(s): 3
Continuation of Networking I. Topics include further analysis of WAN technologies, in-depth TCP/IP terminology, virtual private and remote access concepts, overview of network security, integrity, and management concepts are also introduced. Prerequisite: CST 1213 . (3,2,2)
|
| |
-
CST 2413 - Cloud Computing I
Credit(s): 3
Fundamentals of Cloud computing. Topics include an understanding of terms and characteristics associated with Cloud technologies, an overview of history, virtualization and scalability, and foundational knowledge of the Cloud computing industry. (3,2,2)
|
| |
-
CST 2423 - Cloud Computing II
Credit(s): 3
Continuation of Cloud Computing I. Emphasis is placed on the installation, configuration, and management of Cloud-based systems. (3,2,2)
|
| |
-
CST 2913 - Special Projects
Credit(s): 3
Practical application of skills and knowledge gained in computer servicing and technical-related courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student’s learning experience. Prerequisites: Consent of Instructor. (3,0,6)
|
Career Technical Education (CTE) |
| |
-
CTE 1113 - Occupational Math
Credit(s): 3
This course is designed for apprentices to improve their basic math skills to increase probability of success while in the Apprenticeship Program. Topics covered include general math fundamentals, measurement principles, algebraic fundamentals, fundamentals of plane geometry, and application of trigonometric functions. (3,1,3)
|
| |
-
CTE 1143 - Fundamentals of Construction and Manufacturing
Credit(s): 3
This course includes basic safety, an introduction to construction math, an introduction to hand and power tools, an introduction to construction drawings, employability skills and communications. (Approximately 72.5 clock hours should be allotted in this course to satisfy requirements to test for NCCER Core certification. Instructors for this course must be certified as an NCCER Instructor.) (3,2,2)
|
Culinary Arts (CUT) |
| |
-
CUT 1114 - Culinary Principles I
Credit(s): 4
Fundamentals of food preparation and cookery emphasizing high standards for preparation of meat, poultry, seafood, vegetables, soups, stocks, and farinaceous items. (4,2,4)
|
| |
-
CUT 1124 - Culinary Principles II
Credit(s): 4
This course offers advanced study and application of Culinary Principles I to polish and perfect the techniques of food preparation and cookery emphasizing high standards for food preparation. Prerequisite: HRT 1114 (4,2,4)
|
| |
-
CUT 1135 - Principles of Baking
Credit(s): 5
This course focuses on fundamentals of baking science, terminology, ingredients, weights and measures, and formula conversion and storage. Students will prepare yeast goods, pies, cakes, cookies, and quick breads and use and care for equipment. Prerequisite: HRT 1114 (5,3,4)
|
| |
-
CUT 1153 - Introduction to Culinary Arts
Credit(s): 3
This course is designed as an introduction to the culinary arts industry. The course includes discussions and industry observations to discover the opportunities, trends, problems, and organizations in the field. (3,3,0)
|
| |
-
CUT 1513 - Garde Manger
Credit(s): 3
This course provides orientation to garnishing, preparation of charcuterue items, cold foods, and buffet presentation. It explores the various duties of the modern garde manger. Prerequisite: HRT 1114 (3,1,4)
|
| |
-
CUT 1613 - Nutrition
Credit(s): 3
This course provides information on a study of nutrients as related to personal health, foods and food preparation, recipe or menu modification for special customer needs, and merchandising techniques associated with nutritious meals. (3,1,4)
|
| |
-
CUT 2223 - Menu Planning
Credit(s): 3
This course focuses on the principles and concepts of menu planning, menu formats, and layout with regard to a wide variety of eating habits and taste of the dining public. Emphasis will be on pricing, menu design, merchandising, tools, nutritional considerations, schedules, and profitability. (3,3,0)
|
| |
-
CUT 2243 - Dining Room Management
Credit(s): 3
This course focuses on management of a restaurant dining room including good housekeeping technique, fine food, and efficient service. It covers French, Russian, American, and English waited table service, limited service, counter, tray, service, and catering. Emphasis will be placed on staffing, scheduling, controls and skills required to effectively supervise a dining room operation. (3,2,2)
|
| |
-
CUT 2314 - American Regional Cuisine
Credit(s): 4
This exploration of the American Cuisine concept emphasizes freshness, seasonality, nutrition, indigenous ingredients, and presentation. It is a thorough study into the cuisine characteristics and traditions of the various regions of the United States of America. (4,2,4)
|
| |
-
CUT 2424 - International Cuisine
Credit(s): 4
This course is a study of cuisines of the world with emphasis on use of authentic ingredients, methods, and terminology. Prerequisites: CUT 1124 , CUT 1114 or HRT 1114 , or permission of instructor. (4,2,4)
|
| |
-
CUT 2923 - Supervised Work Experience for Culinary Arts Technology
Credit(s): 3
This course is a cooperative program between industry and education and is designed to integrate the student’s technical studies with industrial experience. Variable credit is awarded on the basis of one semester hour per 45 industrial contact hours. (3,0,9)
|
Dance (DAN) |
| |
-
DAN 1113 - Dance Appreciation
Credit(s): 3
A survey of dance as an importance of worldwide phenomenon of human behavior and its function in human society, past and present (3,3,0).
|
| |
-
DAN 1213 - Beginning Modern Dance
Credit(s): 3
Application and experimentation of the practices of movement patterns improvisation, and studies in modern dance. (3,0,6)
|
| |
-
DAN 1223 - Modern Dance Technique II
Credit(s): 3
Application and experimentation of the practices of movement patterns improvisation, and studies in modern dance. (3,0,6)
|
| |
-
DAN 1313 - Jazz Dance I
Credit(s): 3
Developing the study experimentation and application of the basic skills of Jazz Dance. (3,0,6)
|
| |
-
DAN 1323 - Jazz Dance II
Credit(s): 3
Constructing and interpreting the study and application of jazz movement. Open to non-majors with consent of the instructor. (3,0,6)
|
| |
-
DAN 1543 - Beginning Ballet
Credit(s): 3
Developing the practice of ballet skills for the non-major. (3,0,6)
|
| |
-
DAN 1553 - Ballet Technique II
Credit(s): 3
Constructing and interpreting discussion and practice of ballet skills for the dance major. A continuation of Beginning Ballet. Open to non-majors with consent of instructor. (3,0,6)
|
| |
-
DAN 1711 - Dance Repertory
Credit(s): 1
Designing, composing, creating, contracting and developing a structured rehearsal process culminating in public performance. (1,0,2)
|
3D Modeling and Design Technology (DDT) |
| |
-
DDT 1133 - Machine Drafting I
Credit(s): 3
Emphasizes methods, techniques, and procedures in presenting screws, bolts, rivets, springs, thread types, symbols for welding, materials, finish and heat treatment notation, working order preparation, routing, and other drafting room procedures. Ninety hours instruction. (3,1,4)
|
| |
-
DDT 1163 - Engineering Graphics
Credit(s): 3
This course provides an introduction to fundamentals and principles of drafting to provide the basic background needed for all other drafting courses. (3,1,4)
|
| |
-
DDT 1173 - Mechanical Design I
Credit(s): 3
Students will utilize techniques of modeling to create machine specific drawings. The course emphasizes methods, techniques, and procedures (in presenting screws, bolts, rivets, springs, thread types, symbols for welding, materials, finish and heat treatment notation, working order preparation, routing, and other industry procedures) used in mechanical design. (3,1,4)
|
| |
-
DDT 1213 - Construction Standards and Materials
Credit(s): 3
This course introduces the standards and materials used in the construction process. (3,2,2)
|
| |
-
DDT 1313 - Computer Aided Design I
Credit(s): 3
This course is designed to develop basic operating system and drafting skills on CAD. (3,2,2)
|
| |
-
DDT 1323 - Computer Aided Design II
Credit(s): 3
Subject areas include dimensioning, sectional views, and symbols. Prerequisite:DDT 1313 (3,1,4)
|
| |
-
DDT 1413 - Elementary Surveying
Credit(s): 3
This is a basic surveying course that deals with principles of geometry, theory, and use of leveling instruments; calculations; the control and reduction of errors; and the understanding of land surveying history. (3,1,4)
|
| |
-
DDT 1513 - Blueprint Reading I
Credit(s): 3
Terms and definitions used in reading blueprints. Basic sketching, drawing, and dimensioning of objects will be covered. (3,2,2)
|
| |
-
DDT 1613 - Architectural Design I
Credit(s): 3
This course is a study and development of architectural design principles for a residential and/or commercial structure utilizing a 2D or 3D application. Prerequisites: DDT 1313 , DDT 1323 or instructor approval. (3,1,4)
|
| |
-
DDT 2153 - Civil Planning and Design
Credit(s): 3
This course deals with the development of civil planning and design processes. Prerequisite: DDT 1163 , DDT 1313 and DDT 1323 (3,1,4)
|
| |
-
DDT 2213 - Structural Detailing I
Credit(s): 3
Structural section, terms, and conventional abbreviations and symbols used by structural fabricators and erectors are studied. Knowledge is gained in the use of the A.I.S.C. Handbook. Problems are studied that involve structural designing and drawing of beams, columns, connections, trusses, and bracing (steel, concrete, and wood). Students will utilize 2D or 3D software. Prerequisite: DDT 1163 , DDT 1313 and DDT 1323 (3,1,4)
|
| |
-
DDT 2243 - Cost Estimating
Credit(s): 3
Preparation of material and labor quantity surveys from actual working drawings and specifications. (3,2,2)
|
| |
-
DDT 2373 - 3D Modeling
Credit(s): 3
This course will emphasize the user coordinate system and 3-D modeling. Prerequisite:DDT 1163 , DDT 1313 and DDT 1323 . (3,1,4)
|
| |
-
DDT 2523 - Pipe Drafting
Credit(s): 3
Instruction in basic knowledge needed to create process piping drawings using individual piping components. Students will utilize 2D or 3D software. (3,1,4)
|
| |
-
DDT 2543 - Steel Ship Building and Design
Credit(s): 3
This course is designed to provide the student with an understanding of the ship as a whole and the process of ship design and planning. (3,2,2)
|
| |
-
DDT 2563 - Introduction to Steel Shipbuilding and Blueprint Reading
Credit(s): 3
This course provides instruction in basic steel ship building, blueprint reading and the process of ship design and planning. (3,2,2)
|
| |
-
DDT 2623 - Architectural Design II
Credit(s): 3
Emphasizes standard procedures and working drawings. Details involving architectural, mechanical, electrical, and structural drawings are covered, along with presentation of drawings and computer-aided design assignments. Prerequisite: DDT 1613 . (3,1,4)
|
| |
-
DDT 2643 - Naval Architecture and Ship Structures
Credit(s): 3
This course provides an in-depth insight to the overall shipbuilding process. It begins with a brief history of shipbuilding and proceeds into the shipbuilding processes, the types of steel used in ship manufacturing, welding and testing processes used in ship construction and integration of various components into a functional vessel. (3,2,2)
|
| |
-
DDT 2664 - Marine Systems Integration
Credit(s): 4
The content of this course was developed for a designer apprentice position. This course will place an emphasis on the integration of hull and marine systems into a complete vessel package. The design and analysis of general guidance, hull structure, propulsion, electrical, command and surveillance, auxiliary systems, outfitting and furnishing and annament are investigated. Included is the study of equipment installation, plating, bulkheads, propulsion systems, power generation, and combat systems, HVAC and weapons management. (4,4,0)
|
| |
-
DDT 2723 - Design Collaboration
Credit(s): 3
Practical application of skills and knowledge gained in other drafting courses. Explore team space and the package timeline. Create, explore, and consume packages. Compare changes between software packages. (3,1,4)
|
| |
-
DDT 2753 - Advanced 3D Modeling
Credit(s): 3
This course will provide instruction on the 3D applications. It emphasizes the development of 3D parametric models and the ability to generate 2D drawings, details and renderings from the model. (3,1,4)
|
| |
-
DDT 2813 - Inventor 3D Model and Animation
Credit(s): 3
This course will provide instruction on the 3D applications of lnventor. It emphasizes the development of 3D parametric models and the ability to generate 2D drawings, details and renderings from the model. This course will also provide the utilization of assembly drawings and animation of working parts. (3,1,4)
|
| |
-
DDT 2823 - Revit Architecture
Credit(s): 3
This course provides instruction on the 3D applications of Revit Architecture. It emphasizes the development of 3D parametric models and the ability to generate 2D drawings, details and renderings from the model. This course will also provide the animation walk thru of the 3D building. (3,1,4)
|
| |
-
DDT 2913 - Special Project
Credit(s): 3
Practical application of skills and knowledge gained in other drafting courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student’s learning experience. Prerequisite: Consent of instructor. (3,0,6)
|
Heavy Equipment Maintenance (DET) |
| |
-
DET 1133 - Fundamentals of Equipment
Credit(s): 3
This is a course designed to provide review and update of safety procedures; tools and equipment usage; handling, storing, and disposing of hazardous materials; and operating principles of diesel engines. (3,2,2)
|
| |
-
DET 1223 - Electrical/Electronic Systems I
Credit(s): 3
This is a course designed to provide diagnosis, service, and repair of electrical and electronic systems on diesel engines, includes instruction in general systems diagnostics, starting and charging systems. (3,2,2)
|
| |
-
DET 1263 - Electrical/Electronic Systems II
Credit(s): 3
This is a course designed to provide diagnosis, service, and repair of electrical and electronic systems on diesel engines, includes instruction on lighting systems, gauges and warning devices, and related electrical systems. (3,1,4)
|
| |
-
DET 1364 - Diesel Systems I
Credit(s): 4
This is a course designed to provide diagnosis, service, and repair of basic engine operating principles, with an emphasis on cylinder head and valve train engine block. (4,2,4)
|
| |
-
DET 1373 - Diesel Systems II
Credit(s): 3
This is a course designed to provide skills and knowledge related to the diagnosis, service, and repair of lubrication systems, cooling system, and air induction and exhaust systems. (3,2,2)
|
| |
Page: 1
| 2
| 3
| 4
| 5
| 6
| 7
| 8
| 9
| 10
| 11
|
|
Print this Page